AIDAA Archive

Courses

An overview on space debris protection best practice

An overview on space debris protection best practice

15/16 JUNE 2021

Space debris represent a real threat to the Earth orbit access and utilization. In the development and management of a space mission, it is important to focus on evaluating impact risk, the protection of spacecraft from debris impact, and the modelling of impact-induced fragmentation.
This webinar will focus on the current status and the most promising advancements in this field, introducing the best practices suggested by the scientific community and focusing on specific case studies. Attendees will learn about recent advances in catastrophic fragmentation modelling due to hypervelocity impact, impact risk assessment, spacecraft protection.

Target audience: doctoral students, non-academic professionals, and undergraduate students.

> Download Course Brochure

> Download Presentation

Courses

Composite materials: Modeling, Processing, and Characterization

Composite materials: Modeling, Processing, and Characterization

8-11 JUNE 2021

The global composite material and structure market is a multibillion sector with continuous growth, with the aerospace, automotive, construction, marine, and wind energy industries being the big players. The drivers of the expansion are the demand for high-performance and lightweight composites due to stringent regulations towards, e.g., less polluting vehicles or save weight. Emission targets are leading to develop lighter-weight, affordable composite structures and components at higher volumes. Conversely, the reduction of manufacturing costs and the increase in processing efficiency represent some of the next decade’s challenges.

The design of composites cannot use extensions of the methodologies adopted for metals. Such a strategy may lead to oversizing, let alone the risks arising from a wrong design. Composites are more complex material systems than metals due to their multiscale nature. Brittle orthotropic fibers, ductile isotropic matrices, and soft cores coexist.  Such complexity leads to challenging predictive models. E.g., composite structures’ damage and failure mechanism is still far from reliable predictions via virtual models and needs high computational costs, precluding structural engineering calculations. Uncertainties in the models lead to safety factors and tests. Therefore, currently, the full spectrum of composites’ advantages is not exploitable, and costly experimental tests are necessary.

Other challenges may arise during the manufacturing process; in fact, composite parts are commonly subjected to high pressure and temperature cycles during which thermal/curing-induced free-strains are formed. Mismatch of these free strains at various scales, coupled with mechanical properties’ evolution, leads to residual stresses and, consequently, dimensional changes in the cured composite part. The mismatch occurs at the micro-level between constituents (i.e., fiber and matrix), at the meso-level between plies with different orientations, and at the macro-level between the part and the tool via friction and other geometrical constraints. These manufacturing-induced dimensional changes may reduce mechanical performance and pose significant challenges during the assembling of large and complex parts.

Target audience: doctoral students, non-academic professionals, and undergraduate students.

> Download Course Brochure

> Download Presentations (8-9 June)

> Download Presentations (10-11 June)

Courses

Aircraft Impact Dynamics

Aircraft Impact Dynamics

25 MAY 2021 16.30-18.30 CEST and 28 MAY 2021 10.30-13.00 CEST

The webinar provides an overview of recent developments in a specialized research area on aircraftimpact dynamics.
The original contributions from the authors define the state of the art in the chosen thematic area byfocusing attention on cases of industrial interest addressed to development programmes.
They give an overview of the definition of both of the field of applicability and of how the research hasproduced innovations and improvements. Improvements concern certainly materials and structures, butthey also include the ways of energy absorbing involving a greater part of the structure during theimpact.
This webinar is addressed to PhD students, experienced researchers, regulatory agencies and industryspecialists. It discusses the latest aerospace crashworthiness regulations, certification by analysismethods for aircraft, bird strike, metallic & composite structures, impact dynamics up to computationaland experimental techniques. Finally, two case studies about the aircraft seat structures and an aircraftaccident will be discussed.
Target audience: doctoral students, non-academic professionals, and undergraduate students.

> Download Course Brochure

> Download Presentations (Day 1)

> Download Presentations (Day 2)

Courses

Tethers in Space: deorbiting and power generation

Tethers in Space: deorbiting and power generation

21-22 APRIL 2021, 10.00-12.00 CEST

The Space Tether consists of a complex structure where there are three main parts: 1) the primary satellite; 2) a secondary satellite; 3) a cable (of variable lengths) that is used to join the two spacecraft together. This cable allows the transfer of energy and momentum between the two spacecraft, and this transfer can be present in both directions and, in some cases, can switch direction.

The Space tethers can be classified in two different areas: Passive tethers, which are used simply for mechanical connection and mainly transfer momentum from one part to the other; and Electrodynamic tethers, conductive wires or tapes or more complex structures), in which an electric current can flow and pass from one end to the other.

The simplest application involves using the tether system as a de-orbit system; a drag Force is induced on the tether due to its relative motion with respect to the rotating plasma and the satellite.

An opposite application is the injection of electric current from one satellite and has an effect opposite to the de-orbiting; this effect can be used to increase the SMA of the system or produce movements in the orbital plane.

The Electrodynamic tether is a system that can act as an orbital control for small and relatively big structures (depending on the tether length and on the produced current).

Even if the tethers’ dynamics (passive or electrodynamic) are complex and not at all completely understood, the current knowledge in materials and technology is bridging the gap between theory and extensive application in current Space missions.

Learning objectives: dynamics of tethers; bare and electrodynamic differences; space mission possibilities.

Target audience: doctoral students, non-academic professionals, and undergraduate students.

 

> Download Course Brochure

> Download Presentation

AIDAA Congress, Congresses and events, Past events

AIDAA XXVI International Congress

AIDAA XXVI International Congress

August 31st - September 3rd 2021, PISA (Online)

The 2021 AIDAA Congress is the biennial Congress of the Associazione Italiana di Aeronautica ed Astronautica; it is the 26th Congress, 50 years after the first AIDAA Congress held in Palermo in 1971. The Congress is hosted by the Tuscany Section of AIDAA in Pisa and supported by the Aerospace Division of the Department of Civil and Industrial Engineering (DICI).

The coronavirus outbreak that started in 2020 is still a worldwide emergency, and each of us is asked to contribute to defeating COVID-19. Although the organizers look forward to getting in touch with AIDAA members and friends, the Congress will be entirely online.

phd day
Past events, PhD Days

Meeting of the European PhD Students in Aerospace Engineering

 

Meeting of the European PhD Students in Aerospace Engineering

Online edition · February 2021

The meeting, starting on 15 February 2021, was organised by AIDAA, the Italian Association of Aeronautics and Astronautics, to bring together European PhD students working in aerospace engineering.

Participants presented their research, discussed methodologies and results, and explored opportunities for collaboration with fellow researchers.

Format

The event was held by web conference, with short research presentations followed by questions and discussion.

This page is retained as a historical record of the 2021 online event. Registration is closed.

AIDAA educational series
Courses

Challenges and opportunities for the aerospace frontier

Challenges and opportunities for the aerospace frontier

22nd FEBRUARY 2021

The main instruments for the development and attraction of talent to the European Union (EU) are the European Research Council (ERC) and the Marie Skłodowska-Curie Actions (MSCA).

Over the last decade, the ERC and the MSCA found wide and diverse areas of research of relevance to aerospace and gave many researchers the opportunity to develop their projects with highly competitive conditions. This short webinar is addressed to early-career and experienced researchers and is intended to promote successful proposals for the ERC and MSCA Individual Fellowship grants.

In the first part, EU scientific officers and experts will give an overview on the main characteristics and opportunities offered by the ERC and MSCA-IF funding schemes. Particular attention will be focused on mission, funding, and evaluation process.

In the remaining part of the course, authors of successful ERC and MSCA-IF grant proposals on arguments of aerospace relevance will present their own stories and projects and will give application advice. Details on lessons learnt, proposal writing, preparation of the curriculum vitae, and stage-2 interview will be discussed along with eventual opportunities to join an ERC team.

 

> Download Course Brochure

> Download Presentations

Progettazione dirigibile
Congresses and events, Past events

Conferenza “Ingegneria e progettazione del dirigibile”

Conferenza Ing. Paolo Valsecchi ''Ingegneria e progettazione del dirigibile: analisi storica e prospettive future''

10 DICEMBRE 2020, ONLINE

La conferenza, tenuta dall’Ing. Paolo Valsecchi, si svolgerà il 10 dicembre 2020 dalle ore 15:15 fino alle 17:15.

L’Ing. Paolo Valsecchi è laureato in Ingegneria Aeronautica presso il Dipartimento di Scienze e Tecnologie Aerospaziali del Politecnico di Milano, con una tesi in ambito dirigibilistico. Appassionato di storia e tecnologia aeronautica, e attivo collezionista di cimeli e materiali militari, propone questo seminario con lo scopo di stimolare la curiosità in questo settore dell’ingegneria, dopo essersi interfacciato con progettisti di dirigibili di primaria importanza.

Se consentito dalle disposizioni vigenti alla data della conferenza, l’evento sarà fruibile anche in presenza in aula.

conferenza dirigibili
Congresses and events, Past events

Conferenza “Dirigibili – I transatlantici del cielo”

Conferenza Prof. Max Pinucci ''Dirigibili - I transatlantici del cielo''

10 NOVEMBRE 2020, ONLINE

In occasione delle celebrazioni del centenario, A.I.D.A.A. è lieta di annunciare la conferenza a cura del Prof. Max Pinucci “Dirigibili, i transatlantici del cielo. Un omaggio ad una storia dimenticata ed a futuri scenari: l’epopea dei grandi dirigibili, navi nate per solcare i cieli. Avventure, esplorazioni, lussuosi viaggi tra le nuvole. Cento anni di storia del più leggero dell’aria, cento nuovi progetti per il trasporto del futuro.”

La conferenza si terrà in modalità telematica il prossimo Martedì 10 Novembre dalle 16.30 alle 18.30. Clicca a questo link per partecipare.

(Posti disponibili: 250. Lingua: Italiano)